- Видео 117
- Просмотров 795 959
OTAlucard
Добавлен 29 май 2006
I Like Vintage Chainsaws Engines Weedeaters Edgers Lawnmowers Computers Tvs HIFI Audio Equipment Turntables Vinyl Records 3 Wheelers And Dirtbikes All sorts of stuff just about anything cool
And If I see something cool or unique I Like to make a video about it to show people Cause theres sometimes Theres not a lot of info about some things on the internet
If you see something that You don't see every day you should also make a video about it to show everybody
And If I see something cool or unique I Like to make a video about it to show people Cause theres sometimes Theres not a lot of info about some things on the internet
If you see something that You don't see every day you should also make a video about it to show everybody
Видео
Load transferring to save money / fuel with generators.
Просмотров 3024 года назад
I found that If I could transfer the load fast enough you could start something on one generator. And run it with another that burns less fuel. This would work even better for large fans or electric motors that can run constantly. That need a huge surge to start.
Let's talk about Cargo Trailers In Douglas South Georgia
Просмотров 39 тыс.4 года назад
Going over some of the issues and talking about my frustrations. The lug nuts were hand tight but I was told to check them. So that's good. I was amazed 5 trailers got picked up in one hour and most of the people didn't even look at the trailer or check their lug nuts.
070 Clone saw with 42 inch bar Cutting.
Просмотров 10 тыс.5 лет назад
070 Clone saw with 42 inch bar Cutting.
Ms660 and 070 Clone Saw Thoughts. Year Later
Просмотров 43 тыс.5 лет назад
If you have any questions I am always open but these are some of my experiences.
The best ATV Ever Made Honda ATC 250r
Просмотров 5 тыс.6 лет назад
Super light. I can pick up the back end with one hand. I would imagine that theres maybe 10%-20% left in the world. I wish I could put this engine in a dirtbike. Amazing engine. Just how the power comes on etc.
070 18 inch bar test video for Arboristsite
Просмотров 9206 лет назад
Soon to get a 42 inch bar and an upgraded clutch. I've tuned it alot better now so I can lean into it pretty heavy without it stalling.
070 Clone Chainsaw. First Impressions
Просмотров 18 тыс.6 лет назад
Yeah thought I would make a video explaining my thoughts on this 070 clone saw. I'll make another video after I get it tuned right and cutting wood faster with a 42 inch bar that I Ordered
How I Remove Pulleys from small engines
Просмотров 26 тыс.7 лет назад
I Don't like to use a pulley puller if I Don't have to. This way I Am able to save the pulley
Review 1997 honda cr250 first gen aluminum frame
Просмотров 10 тыс.7 лет назад
I figured I would make this little video to dispel some of the internet rumors about this dirtbike.
Amelia island Lancia s4 totip group b rally car my favorite
Просмотров 5848 лет назад
Amelia island Lancia s4 totip group b rally car my favorite
West German Paper Shredder Vintage Industrial
Просмотров 54310 лет назад
West German Paper Shredder Vintage Industrial
Stihl TS400 Made in germany Cutoff saw Concrete Saw Cold Start
Просмотров 11 тыс.11 лет назад
Stihl TS400 Made in germany Cutoff saw Concrete Saw Cold Start
Stihl BR 420 lives to fight another day
Просмотров 3,3 тыс.11 лет назад
Stihl BR 420 lives to fight another day
Honda Portable Generator Testament To Reliability
Просмотров 30711 лет назад
Honda Portable Generator Testament To Reliability
Bagus
What brand is this? I’d like to avoid….
I bought mine $145 last months, is the price normal?
That's a good price but quality deviates between different companies. Where did you get yours for $145 ?
it passed qc? qc need to find a new job
What brand is this trailer and what dealer sold it? We need to know who to avoid!
Wow! Thanks for the heads up!!!
Bought mine in 94. Still running, even after years of running it on a commercial crew.
Thanks so much it was my first time taking a pully off an old Briggs engine and it worked great!
Great. Me and my buddy just used this trick again to pull off a spider coupler off the front of a Kohler motor flywheel stub shaft. Couldn't get a puller on it sadly
@@OTAlucard that’s too bad
I still run a T27. Love it.
Blessing dawg
what if the pulley is flush
this is why you inspect your trailers good before you buy them
I have a suggestion for you I bought a cargo trailer two years ago a 6 x 12 the day I got it home. I got a ladder and I went up on the roof of it with about the same issues you have. I painted the entire roof for flexseal ergo, no problems whatsoever with it leaking.
I got suckered by the prices of empire trailers in Douglas. Luckily I got out of it the next day , great dealer terrible trailer. I am now going to elite trailer out of tifton GA , looks like way better quality
My friend you get what you pay for you buy a cheap trailer you get a cheap made trailer. I spent the money on my third trailer bought a ATC spent $42,000 on a 8 1/2 x 24 it’s perfect but you spend 8000 to 10,000 cheap steel trailer you get what you pay for unfortunately
Exactly. Its Great for a shed but horrible for a trailer
It might be the people building it care, but they are being managed more for volume than quality. If they don't have quality goals, the workers must just focus on volume production. As I was watching this, was reminded of some cheap products from Asia. It's nothing to do with where it's from, only how it's managed.
You're right. too much production
What company is this?
Quality Control? Unbelievable. Please, what company is this so I can stay away from them. Horrible work. But curious, didn't you inspect this trailer before you took delivery? I'm in the market for a new trailer and have been looking at some of these dealers in Douglas, Ga. But after seeing this? I don't think so.
I don't wanna say who it is. But they're all the same they change names and start new businesses. It's kinda wild. How many I see going down the road with the roof peeling back like a tin can. Mine has never left the neighborhood. I basically use it as a mobile shed.
I don’t get why ppl said woot back then lol
Life is definitely strange. Some things stay. Some things don't.
0:17 Love that sound. It sounds awesome but spooky at the same time 😆
You tryna sell it?
Not really. Do you need one ?
When captured in April 27th 2005.
You know, I tried to register with that website so I could enlarge a picture for something on my Stover 6hp. I filled out the form... Got nothing. And no way to get in touch with Harry, just a worthless site if a person can't register.
BARE FEET...... stand on a nail and LURCH BACKWARDS pulling mower onto feet = IMBECILITY
Very nice radio! Worth every bit of $20!!! I watched your MS 070 videos first.
I have a Shindaiwa F18 that is from around 1992 and I thought I was upgrading 5 years ago when I bought a Stihl FS111R but after less than 40 hours of gentle use on 2 lawns that take around 6mins to trim, the Stihl is out of comission. That being said, the Stihl is going in the trash where it belongs (I know you might be thinking I should sell the Stihl or give it to someone before I trash it but I can't knowingly rip someone off even if it is given away I am still screwing the recipient big time with that heavy expensive piece of dogshit) so it was a $550+ lesson learned the hard way. I'm going back to the little soldier that has proven it's durability and toughness over the many years I have owned it.. Shindaiwa is one of the best brands ever made and sadly enough Stihl is now at the bottom of the list. Very disappointed in Stihl I thought they were reliable but they are at least these days the Kia of weed trimmers and a complete ripoff and I would warn anyone against buying anything made by Stihl which should be spelled STEAL because that is what they do with your money on a new Stihl these days. Maybe Stihl was worth a shit back in the day but as for now, high priced dogshit and that is a compliment compared to what I really feel about that trash... Shindaiwa is the champ as far as I am concerned
were you buy your stihl clone saw need info id like to buy one
A lot of builders use different llc name every few years.
They've already swapped out names for some of their brands I've seen.
The screws on top that’s packing through is to hold the sheets of wood on the bows.Then put metal roof on.Screws must be cheaper than adhesive .
It's holding together but it's never been on the road since I took this video. Just around the neighborhood to have yard sales I think the whole roof would blow off if it went down the highway now.
how much you pay for your 070 copy chasin saw with bar and chain
$265 no tax shipped to the door. Then it was $80 for the bar and chain. Inflation hit hard
All those no big deals add up to a lot of phuck ups on their part. . I won’t buy a trailer from them because all of that.
Glad i watched this...
I bought a rock solid cargo trailer and the quality was pretty good! Who makes this?
That was my 1st computer!
Their website says "our main goal is to take care of our customer".
Yeah they give you screws and caulking. Lol
What size bar does that have on it
Stihl girmany
Siêu phẩm
Man what ever happen to pride and craftsmanship
Also, like 6000 cheaper than other companies so you can’t complain too much
Is this 70s model?
Probably early 80s I'm thinking
@@OTAlucard this days was great even the people usa in 60s they was very classic and mental
Thank you for saving my time and money
Looks like every trailer made in Georgia has alot of problems, I would never buy a trailer from there!
I checked them out and decided to go with Seed Cargo Trailers sold by their sales team listed as Overland Trailers. So far the prices are reasonable and on par with most reputable manufacturers. I believe the quality is good as well. It's not a tank by no means, but it is a solid build, looks good, and is doing good for my needs. I would recommend/
1st gens always get the most harsh criticism...but are always the most loved.
You’re buying a bargain basement trailer for the lowes price yet expect perfection. I bought one of those trailers but a 34 foot triple axle. A friend need to move literally cross country. It was cheaper to do that than to rent a Ryder truck. Which
I think its partly our fault these come out this way- we beat them up over price so they have to do something- but agreed- just a little more time and it could be done right....
Was so excited to find one for $75!! Can’t wait to set it up! I think these will last forever!!!
I put mine up for sale in Central Florida marketplace but I think I'll just end up keeping it. The water pumps are the only weak links in these sadly.
If you need any help with it I'll try my best to help you !
@@OTAlucard where can you buy parts?
@@joyevefarmandforge years ago when I was looking. All the parts I could find were in England and had to be shipped over. I'll probably end up having to modify my water pump to use an electric one possibly
@@OTAlucard so it’s supposed to drain out of the hose at the top? I tried a load and it washes great but doesn’t drain.
? How could you take it so easy
I don't understand how anyone could dislike Zoysia grass
It is a big deal! I got one of these trailers and don't get me started on what a nightmare this purchase has been. They don't care - they have our money. But you know what? It will catch up to them.